Bright zinc additive (50 ml)

Description of the article: Tifoo Zinc plating solution – the product features at a glance: 1000 ml of zinc electrolyte ideal for tank- and pen plating perfectly suited for corrosion- and rust protection for application on iron easy to use and free from cyanide The allrounder for protecting iron and steel from corrosion. For vehicles as well as for outdoor applications in your house and garden: The galvanic zinc plating with the Tifoo Zinc electrolyte allows a permanent protection from rust holes, rusty spots and bodywork destruction, e.g. for vintage cars (vintage car restoring). If you have had enough of the paint peeling of because of pitting corrosion, you'll now have the solution to your problem: The galvanic zinc layer protects workpieces made of iron and steel efficiently from rust and gives them a visually appealing surface thanks to its bright colour. When realized with pen plating, this method is also called e-zink and has the advantage that the objects to be plated don't even have to be removed. The Tifoo Zinc electrolyte is perfectly suited for tank- as well as for pen plating. With the weakly acidic, cyanide-free zinc electrolyte, you'll be able to easily galvanize by yourself! recommended current density: 2.5 amperes / dm² (tank plating) needed voltage: about 1-3 volts for tank plating, 1-5 Volt for pen plating Just use our zinc electrolyte with a zinc anode and you can already galvanize by yourself without any problems. Our zinc electrolyte allows you to: repair rust holes on your car by yourself galvanize sheet metals restore vintage cars galvanize screws restore rusted spots and protect them permanently (Spot-Repair) restore modelling components and protect them from corrosion partially repairing rusty spots on railings, stairs and other components (without the need of removing components) Please read our product instructions for selfmade galvanizing and follow their indications. You'll find suitable electroplating equipments and corresponding accessories in our Tifoo Online offer.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Yellow chromate conversion coating (1000 ml) – the product features at a glance: yellow to golden finish for zinc and zinc-plated objects ideal as finish for the Tifoo zinc plating solution simple immersion bath, no power supply or accessories available 1000 ml content, completely free from highly toxic chromium(VI) also dyes blue passivated zinc parts yellow, e.g. screws and bolts from the DIY superstore The long-standing common chromium(VI) yellow chromate conversion coating is not allowed in Germany any more, not even for commercial users. This is why TIFOO has developped an alternative based on the much less problematic chromium(III). Yellow chromate passivated parts are aesthetic, non-corrosive and essential for all those who work with, for example, vintage cars. The Tifoo yellow passivation creates a shade that is very similar to a chrome(VI) chromate conversion coating. This shade resembles brass - like the old chromate conversion. Also the iridescence effect of the yellow layer is present. The chromate conversion of zinc and zinc workpieces is done simply by dipping the object into the yellow chromate conversion. Without further tools, you will create a yellow passivation layer within a few minutes. During the passivation, some of the zinc will be removed, or better said, dissolved, so please guarantee that the zinc layer is thick enough (>= 2 µm). This is especially valid if you zinc-plated your workpieces yourself with our TIFOO zinc plating solution. You can cancel this process by taking the workpiece out of the bath and rinsing with distilled water. Should the effect be too weak, just put the workpiece again into the bath until the desired shade is achieved. You can obtain shades from weak bright yellow until golden yellow. Scope of delivery: 1000 ml yellow chromate conversion coating (ready to use)

Description of the article: Tifoo Blue chromate conversion coating – the product features at a glance: Ideal finish for zinc-plated layers Permanent protection for the zinc layers Ideally to be used with the Tifoo Zinc electrolyte 1000 ml content Excellent for beginners in the hobby electroplating The chromate conversion coating is a quick corrosion protection for zinc and aluminium surfaces. Apply the protection layers (chromate layers) with the Tifoo Blue Chromate Conversion Coating (also called thick film passivation) and give zinc a noble finish. The term chromate conversion coating / thick film passivation of zinc describes the blue undertone that the tin surface will have after the treatment. The chromate conversion coating is realized by dipping the object in a bath of Tifoo Blue Chromate Conversion Bluing. Without the need of any voltage or of working with other tools, you will obtain a thin layer of chemical conversion. The zinc surface is lightly removed with the thick film passivation. The zinc layer should consequently not be too thin, for that can cause erosion of the zinc. Please keep in mind that this is a Cr (III) based variation of blue chromate conversion coating (thick film passivation). The current version based on Cr (VI) isnt allowed anymore in Germany for chromate conversion coating by the directive of the RoHS because of the toxicity of Cr (VI). Tifoo Blue Chromate Conversion Coating – the perfect corrosion protection for zinc surfaces. Easy self-made chromate conversion coating!

Description of the article: Tifoo Polishing agent "Power Polish" (250 ml) – the product features at a glance: easy polishing of various metals with Tifoo Power Polish Polish for post treatment after plating Removes black discolourations and makes the object gleam 250 mL highly effective polish Polish for most metals This top product from Tifoo allows you to polish numerous metals like iron, nickel, lead, tin, silver, gold, copper, zinc, aluminium, chrome, bronze, brass, palladium, rhodium or platinum. In order to achieve a perfect finish after the electroplating process, we also recommend our Tifoo Power Polish for making the workpiece shine. It allows also to get easily rid of blackening or other discolouration. The application is very simple: apply the polish with a soft and dry piece of cloth on the metal in question, polish it and let the polish work in for a moment. After removing eventual residues with alcohol, the shining result can already be seen. A very good combination for gilding almost every metal: copper (acidic), nickel (or palladium or rhodium) and finally gold. We recommend nickel-plating before if youre treating copper, silver and non-ferrous heavy metal because after some days or week, the gold can mix with the shades (diffusion). All of the necessary electrolytes can be purchased in our online shop. We also offer a currentless alternative to nickel plating. Our varied range of galvanic products and electrolyte solutions supports you in hobby and job. Please read also our instruction manuals.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.