Degreaser

Description of the article: Tifoo Alkaline copper plating solution – the product features at a glance: 1000 ml of alkaline copper plating solution ideal for tank- and pen plating 50 g of copper / litre for iron and tin objects Easy to use and free from cyanide This plating solution is ideally suited to plate on materials which are sensitive to acids, like iron, steel or zinc. It allows to copper-plate e.g. material that would be damaged by the acidic copper electrolyte - like for example steel or other iron material. A copper layer protects the iron or steel workpieces from rust and gives them a visually appealing look thanks to the red gleam of this noble metal. Thanks to it's good solderability, galvanic copper-plating is perfect for creating circuit boards and platines. Just use the copper electrolyte together with a copper sheet as anode and you yourself can already copper-plate a component with a bright copper layer. You can find detailed instructions for the product in our online shop. For copper-plating material that is not susceptible to acids, please use the Tifoo Bright copper electrolyte. If you have any questions, we'll be happily at your disposal.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Activator for anodization – the product features at a glance: DIY anodizing of Aluminium The previous degreasing and cleaning of the aluminium are important steps to undertake before the anodization. In order to achieve perfect dyes or end results, it is essential to clean and degrease the aluminium surface thoroughly - and this is what the Tifoo Anodization activator is for. Simply dip the workpieces into the solution and leave them in this bath for about 5 to 20 minutes - according to the degree of dirt on it.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Galvano activator (1000 ml) – the product features at a glance: needed for plating aluminium and nickel among other things 1000 ml content perfect for gilding aluminium, for example prepares stainless steel and chrome for the following nickel-plating The Tifoo Galvano activator is needed to prepare nickel, aluminium, stainless steel and chrome for electroplating. You just have to dip them shortly in and the surfaces will already be ready for electroplating. More detailed instructions can be found in the manual of the product. Scope of delivery: 1000 ml of Galvano activatorShipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.

Description of the article: Tifoo Copper conductive paint (400 ml) – the product features at a glance: 400 ml of conductive copper paint for electroplating for airbrush and brush makes non-conductive material conductive plating plants and natural objects easy and filigree application This galvanic conductive paint on copper base from Tifoo allows you to plate works of art and gifts made of glass, pottery, plastic and a lot of other material with a bright layer of metal in a short time. Just apply a thin layer of the conductive paint with a brush on the cleaned surface. The copper conductive paste dries until rub-proff in 10 to 15 minutes and therefore allows a quick treatment of the workpieces. The complete drying for perfect resistance on stressed surfaces takes about 12 to 36 hours at room temperature. The varnish can be diluted with butyl acetate. In the next step, the object is connected to a wire and copper-plated in the acidic copper electrolyte from Tifoo. A resistant copper layer will then be deposited. The last step can be used for nickel-plating, silver-plating or even gilding! Thanks to its low price and the high electrical and thermical conductiveness, the conductive copper varnish is the perfect alternative to the conductive silver varnish. Please keep in mind that the first step has to consist in copper-plating in the acidic copper electrolyte because the conductive varnish won't be activated before. After copper-plating, the metal layer will be wear-resistant. Suitable material: synthetic material, glass, pottery, plants, wood and a lot of other non-conductive material Drying time: 5-15 minutes (rub-proof), 1-3 days (complete for maximal requirements) 20 mL are enough for a surface of up to one square metre - very efficient!Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.