.jpg)
Zinc sheet anode
Product number:
01-73-00000
Product information "Zinc sheet anode"
Description of the article:
Tifoo Zinc sheet anode – the product features at a glance:
- size: 150 x 100 x 0.6 mm
- ideal for galvanizing
- perfectly compatible with the small Tifoo "Galvanic tank"
- also available: graphite, copper and nickel anodes
The zinc anode is perfectly suited for working with zinc electrolytes. It serves as a sacrificial anode, i.e. the zinc dissolves and regenerates the electrolyte. This guarantees a constantly good deposition. On request, we will offer further electrode sheets. Don't hesitate in contacting us!
Login
Reviews are not verified as to the authenticity of purchases. Reviews may be from consumers who have not purchased or used the products.
Similar articles
Zinc plating solution
€33.90*
Description of the article: Tifoo Zinc plating solution – the product features at a glance: 1000 ml of zinc electrolyte ideal for tank- and pen plating perfectly suited for corrosion- and rust protection for application on iron easy to use and free from cyanide The allrounder for protecting iron and steel from corrosion. For vehicles as well as for outdoor applications in your house and garden: The galvanic zinc plating with the Tifoo Zinc electrolyte allows a permanent protection from rust holes, rusty spots and bodywork destruction, e.g. for vintage cars (vintage car restoring). If you have had enough of the paint peeling of because of pitting corrosion, you'll now have the solution to your problem: The galvanic zinc layer protects workpieces made of iron and steel efficiently from rust and gives them a visually appealing surface thanks to its bright colour. When realized with pen plating, this method is also called e-zink and has the advantage that the objects to be plated don't even have to be removed. The Tifoo Zinc electrolyte is perfectly suited for tank- as well as for pen plating. With the weakly acidic, cyanide-free zinc electrolyte, you'll be able to easily galvanize by yourself! recommended current density: 2.5 amperes / dm² (tank plating) needed voltage: about 1-3 volts for tank plating, 1-5 Volt for pen plating Just use our zinc electrolyte with a zinc anode and you can already galvanize by yourself without any problems. Our zinc electrolyte allows you to: repair rust holes on your car by yourself galvanize sheet metals restore vintage cars galvanize screws restore rusted spots and protect them permanently (Spot-Repair) restore modelling components and protect them from corrosion partially repairing rusty spots on railings, stairs and other components (without the need of removing components) Please read our product instructions for selfmade galvanizing and follow their indications. You'll find suitable electroplating equipments and corresponding accessories in our Tifoo Online offer.Shipping notes: As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.
Zinc rod anode (Ø 8 mm)
€12.90*
Description of the article:
Tifoo Zinc rod anode (Ø 8 mm) – the product features at a glance:
zinc rod anode of 99% zinc
length 10 cm, Ø 8 mm
suitable for Tifoo pen / brush plating (GalvanoBrush)
The zinc rod anode (diameter: 8 mm, length: 10 cm) is ideally compatible with our Tifoo brush plating system "GalvanoBrush". You can easily replace the anode in this pen, when it's e.g. worn out. The zinc anodes for pen plating allow you an ideal zinc deposition when using zinc electrolytes. The zinc anodes serve as sacrificial anode and guarantee an even zinc deposition while galvanizing with swab- or pen plating. The zinc rod anodes fit perfectly into the support of the Tifoo GalvanoBrush kit and allow a quick exchange with other rod electrodes from our online shop (e.g. nickel rod anode, copper rod anode or graphite rod anode). With that, you can always use the best fitting anodes for the corresponding application situation.
Tip
E-Zinc - Full set
€153.90*
Description of the article:
Tifoo E-Zinc - Full set – the product features at a glance:
power supply with 3 amperes and 18 volts
swab pen (for different electrodes) + zinc electrode
1x microfibre swab, 2 cables and alligator clip
Zinc electrolyte 1000 ml + Tifoo Power Polish 200 ml
The E-Zink full set from Tifoo allows you to easily galvanize vehicle parts and many other things. Galvanizing is the perfect corrosion protection for further painting and is the perfect rust protection for iron metals. The included power supply allows you to adjust and regulate the needed current intensity for achieving perfect results, which can't be achieved with a car battery. The Tifoo E-Zinc works on sheet metal, bodywork tin and on already galvanized metal sheets. Galvanizing with E-Zinc is the perfect etching primer for every varnish, offers rust protection and can easily be painted on without further preparation. E-Zinc is the best possibility for DIY galvanizing of bodywork metal sheets. With the included Tifoo PowerPolish, you'll be able to make the zinc very bright.
Besides, the E-Zinc kit from Tifoo allows you to galvanize for example:
motorbike parts
vintage car parts
screws
Scope of delivery:
1x power supply (3 A - 18 V)
1x swab pen (with exchangeable electrodes, e.g. for chrome-plating)
1x zinc plating
1x microfibre swab
1x zinc electrolyte (1000 ml)
1x Tifoo PowerPolish (200 ml)Shipping notes:
As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.
Stainless steel anode
€15.90*
Dimensions:
15 x 10 cm
Description of the article: Tifoo Stainless steel anode – the product features at a glance: Stainless steel anode for electroplating with Tifoo gold- and palladium plating solutions works with gold-, palladium- and chloride-free plating solutions size: 150 x 100 x 0.5 mm conductivity of 1-1.5 MS/m almost no abrasion The stainless steel anode is made of resistant steel, shows a high chemical consistency and unlike other anode material doesn't dissolve and therefore protects the used plating solution. The stainless steel anode is perfectly suited for use with our plating solutions for tank plating. The stainless steel anode can be used with the following plating solutions: gold plating solution palladium plating solution chloride-free plating solutions Contact the plate ideally with an alligator clip outside of the plating solution. Before use, the stainless steel plate has to be degreased with our Galvanic degreaser, acetone or spirit!
Variants from €9.90*
Zubehör
Bright zinc additive (50 ml)
€11.90*
Description of the article:
Tifoo Bright zinc additive (50 ml) – the product features at a glance:
Brightening additive for zinc plating solution by Tifoo
Recommanded for tank plating
50 ml are enough for 5 litres of zinc plating solution
Brightening additive for Tifoo zinc plating solution - shiny zinc plating
The brightening additive regenerates used zinc plating solution. Just mix 50 ml of this brightener in 5 litres of used or fresh zinc plating solution and you can create shiny zinc layers again.
Shipping notes:
As this item is classified as "hazardous" by REACH / GHS, international shipment is subject to special regulations of the carrier. You can find more information in our shipping fee table.
Content: 0.05 Liter (€238.00* / 1 Liter)
Yellow chromate conversion coating (1000 ml)
€33.90*
Description of the article:
Tifoo Yellow chromate conversion coating (1000 ml) – the product features at a glance:
yellow to golden finish for zinc and zinc-plated objects
ideal as finish for the Tifoo zinc plating solution
simple immersion bath, no power supply or accessories available
1000 ml content, completely free from highly toxic chromium(VI)
also dyes blue passivated zinc parts yellow, e.g. screws and bolts from the DIY superstore
The long-standing common chromium(VI) yellow chromate conversion coating is not allowed in Germany any more, not even for commercial users. This is why TIFOO has developped an alternative based on the much less problematic chromium(III). Yellow chromate passivated parts are aesthetic, non-corrosive and essential for all those who work with, for example, vintage cars. The Tifoo yellow passivation creates a shade that is very similar to a chrome(VI) chromate conversion coating. This shade resembles brass - like the old chromate conversion. Also the iridescence effect of the yellow layer is present.
The chromate conversion of zinc and zinc workpieces is done simply by dipping the object into the yellow chromate conversion.
Without further tools, you will create a yellow passivation layer within a few minutes. During the passivation, some of the zinc will be removed, or better said, dissolved, so please guarantee that the zinc layer is thick enough (>= 2 µm). This is especially valid if you zinc-plated your workpieces yourself with our TIFOO zinc plating solution. You can cancel this process by taking the workpiece out of the bath and rinsing with distilled water. Should the effect be too weak, just put the workpiece again into the bath until the desired shade is achieved. You can obtain shades from weak bright yellow until golden yellow.
Scope of delivery:
1000 ml yellow chromate conversion coating (ready to use)
Blue chromate conversion coating
€32.90*
Description of the article: Tifoo Blue chromate conversion coating – the product features at a glance: Ideal finish for zinc-plated layers Permanent protection for the zinc layers Ideally to be used with the Tifoo Zinc electrolyte 1000 ml content Excellent for beginners in the hobby electroplating The chromate conversion coating is a quick corrosion protection for zinc and aluminium surfaces. Apply the protection layers (chromate layers) with the Tifoo Blue Chromate Conversion Coating (also called thick film passivation) and give zinc a noble finish. The term chromate conversion coating / thick film passivation of zinc describes the blue undertone that the tin surface will have after the treatment. The chromate conversion coating is realized by dipping the object in a bath of Tifoo Blue Chromate Conversion Bluing. Without the need of any voltage or of working with other tools, you will obtain a thin layer of chemical conversion. The zinc surface is lightly removed with the thick film passivation. The zinc layer should consequently not be too thin, for that can cause erosion of the zinc. Please keep in mind that this is a Cr (III) based variation of blue chromate conversion coating (thick film passivation). The current version based on Cr (VI) isnt allowed anymore in Germany for chromate conversion coating by the directive of the RoHS because of the toxicity of Cr (VI). Tifoo Blue Chromate Conversion Coating – the perfect corrosion protection for zinc surfaces. Easy self-made chromate conversion coating!
Galvanic microfibre swabs (4 pieces)
€13.90*
Description of the article:
Tifoo Galvanic microfibre swabs (4 pieces) – the product features at a glance:
compatible with Tifoo pen plating system "GalvanoBrush"
4 swabs made of highly absorbant micro fibre material
maximum speed for electroplating
resistant to chemicals and durable
top quality - sewed
4 Exchangeable swabs in top quality. Perfectly suited for all of the galvanic electrolytes from Tifoo. Especially suited for chrome electrolyte. The swabs are made of robust and absorbant microfibre and are completely sewed, so that a long working life is guaranteed. The swabs have an opening at one side so that they can easily be put on our electroplating rod anodes. Microfibre is resistant to chemicals and for that very durable.